2.1.4, basic type 1 RO process, production of direct drinking water complete equipment series product introduction (model B10-B19-DPW/water production 0.5-10m³/h)

2.1.4, basic type 1 RO process, production of direct drinking water complete equipment series product introduction (model B10-B19-DPW/water production 0.5-10m³/h)

2.1.1, level 1 RO process production of direct drinking water set equipment 3 configuration selection table 1 (water production 0.5-10m³/h)

2.1.2, customized [level 1] process, produce direct drinking water complete equipment process flowchart (model E10-19/B10-19/A10-19-DPW/water production 0.5-10m³/h)

*Level 1 RO to produce direct drinking water set equipment process flowchart and flat layout chart

Tap water → supercharged pump → quartz sand filter 1 → activated carbon filter 2 → 5um security filter 3 → 1RO high -pressure pump → 1RO device → direct drinking water tank → constant voltage water supply pump → UV sterilization light → 0.1um filter → water point with water points

Water entry requirements: urban tap water TDS <300ppm, water supply pressure> 0.2MPa, water temperature 5-20 ° C.

Equipment installation requirements: indoor, the ambient temperature is 5-30 ° C, and the humidity is <60%. Equipment occupation venue area: 10-50 square meters

Power supply specifications: 220 or 380VAC/50Hz. Power distribution power is 10-20kWh. Practical power 2-20kWh.

Water production: 0.5-10m ：/h option.

Water production quality: reach the standard of direct drinking water in China C94-2015 pipeline.

Applicable occasions: For all walks of life, colleges and universities, primary and secondary schools, rural direct drinking water, cleaning water, etc.

2.1.4.1. Basic type 1 RO process, production of direct drinking water complete equipment series product photos (model B10-B14-DPW/water production 0.5-1.5m³/h)

2.1.4.3, basic type 1 RO process, production list of direct drinking water set equipment series products (model B10-B14-DPW/water production 0.5-1.5m³/h)

2.1.4.5, basic type 1 RO process, production technical parameters of direct drinking water set equipment (model B10-B14-DPW/water production 0.5-1.5m³/h)

*Complete set of equipment water entry requirements:

Urban tap water TDS <300ppm, water supply pressure> 0.2MPa, water temperature 5-25 ° C.

*Environmental requirements: indoor, the ambient temperature is 5-30 ° C, and the humidity is <60%.

*Installation site area: 10-20 square meters/set.

*Power supply specifications: 220 or 380VAC/50Hz.

*Practical power: 1-5kWh. Power distribution power: 5-10kWh.

*Level 1 RO complete equipment water production (m³/h): 0.50; 0.75; 1.00; 1.25; 1.50.

*Level 1 RO complete equipment water production quality: meet the standard of direct drinking water in China CJ94-2015.

*Basic complete sets of equipment: Water -making equipment and electrical components allocate B -level products. The FRP FRP has a level 3 pre -processing equipment, the low -pressure pipeline uses the UPVC pipeline, the high -pressure pipeline water tank is made of 304 stainless steel, the monitoring equipment uses an integrated touch screen+PLC electrical appliance, and the service life of equipment and electrical components is designed for 10 years. It has automated water -making and water supply functions; monitoring information digital collection to realize IoT monitoring and management.

*Applicable occasions of commercial direct drinking water equipment: suitable for regions with high hardness of urban tap, use their production of direct drinking water/purifying water/soft water.

2.1.4.7, the basic type 1 RO process, producing direct drinking water set equipment application schematic diagram (model B10-B14-DPW/water production 0.5-1.5m³/h)

2.1.4.2, basic type 1 RO process, production of direct drinking water complete equipment series product reference pictures (model B15-B19-DPW/water production 2-10m³/h)

2.1.4.4, basic type 1 RO process, production list of direct drinking water set equipment series products (model B15-B19-DPW/water production 2-10m³/h)

2.1.4.6, basic type 1 RO process, production technical parameters of direct drinking water set equipment (model B15-B19-DPW/water production 2-10m³/h)

*Set up equipment Water inlet Requirements:

Urban tap water TDS <300ppm, water supply pressure> 0.2MPa, water temperature 5-25 ° C.

*Equipment installation environment requirements: indoor, the ambient temperature is 5-30 ° C, and the humidity is <60%.

*Installation site area: 20-50 square meters/set.

*Power supply specifications: 380VAC/50Hz.

*Practical power: 5-10kWh. Power distribution power: 15-30kWh.

*Level 1 RO production (m³/h): 2; 4; 6; 8; 10.

*Grade 1 RO water production quality: reaching China's CJ94-2015 direct drinking water standard.

*Basic complete sets of equipment: Water -making equipment and electrical components allocate B -level products. The FRP FRP has a level 3 pre -processing device, the low -pressure pipeline uses the UPVC pipeline, the high -pressure pipeline is made of 304 stainless steel, and the monitoring equipment uses an integrated touch screen+PLC electrical appliance. The service life of equipment and electrical components is designed for 10 years. With automated water and water supply function. Monitoring information digital collection to achieve Internet of Things monitoring and management.

*Applicable occasions: Suitable for cities with high water hardness to use other production of direct drinking water/purifying water/soft water.

2.1.4.8, the basic type 1 RO process, producing direct drinking water set equipment application schematic diagram (model B15-B19-DPW/water production 2-10m³/h)