2.8.4, SWRO type seawater desalination processProduct introduction of complete equipment series for the production of desalinated water (model SWRO1-SWR10/water production 12-72m³/D)
2.8.4.1, SWRO type seawater desalination process, process flow chart of complete equipment for producing desalinated water (model SWRO1-SWR10/water production 12-72m³/D)
*SWRO process desalination water production equipment water production/water supply process flow block diagram and floor plan
Brackish water/high-salt water/seawater → booster pump → quartz sand filter 1→ activated carbon filter 2→ 5um security filter → high-pressure pump →SWRO device →UV sterilization water tank → constant pressure water supply pump →UV germicidal lamp →0.1um bacterial filter → desalinated water point
Water inlet requirements: brackish water/high salt water/seawater TDS<30000ppm, water supply pressure>0.2MPa, water temperature 5-25℃.
Equipment installation requirements: Indoor, ambient temperature is 5-30℃, humidity is less than 60%.
Power supply specifications: 220 or 380Vac/50Hz. Distribution power: 30-0.1kwh. Practical power 10-0.05kwh.
Water production: 0.5-10m³/h optional.
Produced water quality: Meet China GB5749 -2022 domestic drinking water standard.
Application occasion: Provide domestic drinking water/direct drinking water/desalinated water for rural schools and enterprises in special areas where drinking water sources are not accessible.
2.8.4.2, SWRO type seawater desalination process, reference photo of complete equipment for producing desalinated water (model SWRO1-SWR05/water production 12-36m³/D)
2.8.4.4, SWRO type seawater desalination process, configuration list of complete equipment for producing desalinated water (model SWRO1-SWR05/water production 12-36m³/D)
Model/configuration of complete equipment for producing desalinated water | NF water production m³/D | One inlet booster pump | Sand filter/carbon filter model and quantity | 5um security filter 1 set | SWRO plunger high-pressure pump 1 set | SWRO membrane shell specification * quantity | UV sterilization lamp water storage tank capacity * quantity | 1 fully automatic desalinated water supply pump | 1 set of 0.1um bacterial filter | 1 ozone sterilizer * Ozone output |
SWRO1-12 | 12 | CRN 4-3 | 1654*2units | 20"*5cores | CRN4-28*2 | 4040*2*2strips | 0.50m³*1unit | CDL 1-3 | 20"*1core | 10g/H |
SWRO2-18 | 18 | CRN 4-3 | 1654*2units | 20"*7cores | CRN4-28*2 | 4040*2*3strips | 0.75m³*1unit | CDL 2-3 | 20"*1core | 10g/H |
SWRO3-24 | 24 | CRN 6-3 | 2072*2units | 30"*fat5cores | CRN6-28*2 | 4040*2*4strips | 1.00m³*1unit | CDL 2-3 | 20"*2cores | 10g/H |
SWRO4-30 | 30 | CRN 6-3 | 2072*2units | 30"*fat7cores | CRN6-28*2 | 4040*2*5strips | 1.25m³*1unit | CDL 2-3 | 20"*2cores | 10g/H |
SWRO5-36 | 36 | CRN 8-3 | 2472*2units | 40"*fat5cores | CRN8-28*2 | 4040*2*6strips | 1.50m³*1unit | CDL 2-3 | 20"*3cores | 10g/H |
Equipped with 1 set of UF ultrafiltration monitor, model A-SWRO-JYW1; 1 set of chemical cleaning device; Huitong SWRO membrane 4040 | dual phase steel | FRP filter | FRP filter | dual phase steel | FRP1000PSI | PE water tank | 304 stainless steel | 304 stainless steel | 304 stainless steel |
2.8.4.6, SWRO type seawater desalination process, technical parameters of complete equipment for producing desalinated water (model SWRO1-SWR05/water production 12-36m³/D)
* Water inflow requirements for complete equipment:
Brackish water/seawater/highly salty sewage: TDS<32ppm, water supply pressure> 0.2 MPa, water temperature 5-25℃
* Operating environment requirements: Indoor, ambient temperature is 5-30℃, humidity is <60%.
* Installation site area: 20-30㎡/set
* Power supply specification: 380VAC/50Hz. Practical power is 5-10kwh. Distribution power is 10-30kwh.
* Water production of SWRO desalination water complete equipment (m³/h):0.5;0.75;1.0;1.25;1.5
* Water quality of SWRO desalinated water complete equipment: meets China's direct drinking water CJ94 -2015 standard
*SWRO desalination water complete equipment: water production equipment and electrical components are equipped with Class A products. It adopts FRP Grade 2 pretreatment equipment, the low-pressure pipeline is made of UPVC pipeline, the high-pressure pipeline is made of dual-phase steel, the desalination water tank is made of PE, the monitoring equipment is made of General Electric, and the service life of equipment and electrical components is expected to be 10 years; it has automated water production and water supply functions.
* For applications in places without municipal power supply, solar power supply systems can be equipped. Costs are calculated separately.
* Applicable occasion: Suitable for desalination and purification of brackish water/seawater/highly salty sewage, production of domestic drinking water and direct drinking water.
2.8.4.8, SWRO type seawater desalination process, application diagram of complete equipment for producing desalinated water (model SWRO1-SWR05/water production 12-36m³/D)