2.8, Customized UF/NF/SWRO/MBR process, membrane water treatment complete equipment series product introduction (model 01-10-DW-0.5-10m³/h)
2.8.1, UF/NF/SWRO membrane separation water purification process, complete equipment model selection Table 8 (water production 0.5-10m³/h)
Water production m³/H | Specifications and models of UF separation complete equipment | NF type separation complete equipment specifications and models | Specifications and models of SWRO seawater desalination complete equipment | MBR type sewage treatment complete equipment model/configuration |
0.50 | UF01-0.50 | NF01-0.50 | SWRO1-0.50 | MBR01-12 |
0.75 | UF02-0.75 | NF02-0.75 | SWRO2-0.75 | MBR02-18 |
1.00 | UF03-1.00 | NF03-1.00 | SWRO3-1.00 | MBR03-24 |
1.25 | UF04-1.25 | NF04-1.25 | SWRO4-1.25 | MBR04-30 |
1.50 | UF05-1.50 | NF05-1.50 | SWRO5-1.50 | MBR05-36 |
2 | UF06-2 | NF06-2 | SWRO6-2 | MBR06-48 |
4 | UF07-4 | NF07-4 | SWRO7-4 | MBR07-96 |
6 | UF08-6 | NF08-6 | SWRO8-6 | MBR08-144 |
8 | UF09-8 | NF09-8 | SWRO9-8 | MBR09-192 |
10 | UF10-10 | NF10-10 | SWR10-10 | MBR10-240 |
monitoring equipment | UF-JYRW1 | B-NF-JYRW2 | A-SWRO-JYRW3 | A-MBR-JYRW4 |
2.8.2, UF ultrafiltration process, product selection table for complete sets of equipment for producing purified water (model UF01-UF10/water production 0.5-10m³/h)
2.8.2.. 1. UF ultrafiltration process, process flow chart of complete equipment for producing purified water (model UF01-UF10/water production 0.5-10m³/h)
*UF ultrafiltration production purified water complete equipment water production/water supply process flow block diagram and floor plan
Tap water → booster pump → quartz sand filter 1→ activated carbon filter 2→ 5um security filter 3→ booster pump →UF ultrafiltration device →UV sterilization purification water tank → constant pressure water supply pump →UV germicidal lamp →0.1um bacterial filter → water point
Water inlet requirements: TDS of mountain spring water/river water/groundwater <200ppm, water supply pressure> 0.2 MPa, water temperature 5-25℃.
Equipment installation requirements: indoor. The ambient temperature is 5-30℃ and the humidity is less than 60%.
Equipment occupation area: 10-30㎡.
Power supply specifications: 220 or 380Vac/50Hz; distribution power 10-20kwh. Practical power: 1-10kwh.
Water production: 0.5-10m³/h optional.
Produced water quality: Meet China GB5749 -2015 drinking water standard.
Application: Provide domestic drinking water/purified water for rural and construction site personnel without running water.
2.8.2.2, UF ultrafiltration process production complete equipment for purified water, reference photo (model UF01-UF05/water production 0.5-1.5m³/h)
2.8.2.4, UF ultrafiltration process, configuration list of complete equipment for producing purified water (models UF01-UF05/water production 0.5-1.5m³/h)
Model/configuration of complete equipment for producing purified water | UF water production rate m ³/h | One inlet booster pump | Sand filter/carbon filter model and quantity | 5um security filter 1 set | 1 set of UF water supply pump | UF membrane shell specification * quantity | UV sterilization lamp water storage tank capacity m ³ * quantity unit | 1 fully automatic purified water supply pump | 1 set of 0.1um bacterial filter | 1 ozone sterilizer * Ozone output |
UF01-0.50 | 0.50 | CHL 1-3 | 1054*2units | 20"*1core | CHL 1-3 | 4040*1*2strips | 0.50*1unit | CDL 1-3 | 20"*1core | 10g/H |
UF02-0.75 | 0.75 | CHL 2-3 | 1254*2units | 20"*1core | CHL 2-3 | 4040*1*3strips | 0.75*1unit | CDL 2-3 | 20"*1core | 10g/H |
UF03-1.00 | 1.00 | CHL 2-3 | 1354*3units | 20"*Fat 1 core | CHL 2-3 | 4040*1*4strips | 1.0*1unit | CDL 2-3 | 20"*2core | 10g/H |
UF04-1.25 | 1.25 | CHL 2-3 | 1465*2units | 20"*Fat 1 core | CHL 2-3 | 4040*2*3strips | 1.25*1unit | CDL 2-3 | 20"*2core | 10g/H |
UF05-1.5 | 1.50 | CHL 4-3 | 2072*2units | 20"*Fat 1 core | CHL 4-3 | 4040*2*4strips | 1.5*1unit | CDL 2-3 | 20"*3core | 10g/H |
Equipped with 1 set of UF ultrafiltration monitor, model E-UF-JYW1; 1 set of chemical cleaning device; Huitong UF membrane 4040 | 304 stainless steel | FRP fiberglass reinforced plastic | ABS plastic filter | 304 stainless steel | 304 stainless steel | PE water tank | 304 stainless steel | 304 stainless steel | 304 stainless steel |
2.8.2.6, UF ultrafiltration process, application technical parameters of complete equipment for producing purified water (model UF01-UF05/water production 0.5-1.5m³/h)
* Water inflow requirements for complete equipment:
River water/mountain spring water:TDS<300ppm, water supply pressure>0.2MPa, water temperature 5-25℃.
* Operating environment requirements: indoor; ambient temperature 5-30℃, humidity <60%.
* Installation site area: 10-20㎡/set
* Power supply specification: 220 or 380Vac/50HZ.
* Practical power: 1-3kwh. Distribution power: 5-15kwh.
* Water quality of UF ultrafiltration complete equipment (m³/h): 0.5;0.75;1;1.25;10
* Water quality of UF ultrafiltration complete equipment: meets China GB5749 -2015 standard.
* Features of UF ultrafiltration complete equipment: Water production equipment and electrical components are equipped with Class C products. It adopts FRP Grade 2 pretreatment equipment; high and low pressure pipes are made of UPVC pipes, water tanks are made of PE material, monitoring equipment is made of General Electric, and the service life of equipment and electrical components is designed to be 5 years; it has automated water production and water supply functions.
* Rural areas without municipal power supply can be equipped with solar power generation power supply systems. Costs are calculated separately.
* Applicable occasion: Suitable for rural production and domestic drinking water with mountain spring water/river water.
2.8.2.8, UF ultrafiltration process, application diagram of complete equipment for producing purified water (model UF01-UF05/water production 0.5-1.5m³/h)